Demo Video for DIYPhotobits.com Camera Control 2.1

I thought it was well past time that I did some more explanation of how to use the new features in DIYPhotobits.com Camera Control 2.1.

Turns out my video skills need a bit of work though as I ended up putting together a 10 minute video, the YouTube limit, and only covered half the features. Still, I hope this is helpful both to see what sort of thing the script is useful for — in this case I’m covering self-portrait balancing flash vs ambient ala Strobist.

 

(Click through and view the high quality version if you want to read the text!)

Equipment used:

  • 1 x SB-600 at camera left set at manual 1/4 power with a folding paper grid spot  on a bamboo light stand
  • 1 x SB-800 at camera right, also manual 1/4 power
  • Nikon D300 with a 18-55mm 
  • Pop-up flash on the D300 is the trigger for the flashes
  • Long USB cable, plus a USB extender cable
  • Thinkpad X31

I cover the use of the remote shutter release, combined with shutter, aperture and ISO controls to take and download images as well as using Bridge to view them.

What I ran out of time to do before the YouTube 10 minute limit was tethered shooting from the camera, and external viewer push.  Perhaps I’ll try to do another short video covering those, but I do really want to work on the next features!

While doing this demo I also noted some odd slowness of the script in some situations, particularly M vs P mode that I’m unable to explain at the moment, so will spend some time to investigate that and hopefully speed the whole thing up.

You know what a Justin Clamp is, right?

If you follow any of the small light shooters or “strobism” in general as I do then you’ll have come across the “Justin Clamp” quite a few times in passing.  If not, then lets just say it is an ugly beast that provides several useful ways to attach something to something else — typically a hotshoe flash to a pole, shelf, tripod leg or probably someone’s nose if they stay still long enough.

Supposedly it was invented by Justin Stailey (formerly of Bogen, now of Leica USA per Drew Gardner)  to satisfy the need of one particular photographer, but anyone can buy one if you are prepared to part with the cash.

It comes with a cold shoe but it may be a bit tight for the SB-900, but works fine with an SB-800.  Now I haven’t got a 900 but presume that like a SB800 it comes with it’s own cold foot or stand – the AS-19 which is a often ignored but very useful piece of kit.

This gives me a simple option to DIY a replacement for a Justin Clamp, for cheap.  A Bulldog clip from a stationary store, bolt and a couple of nuts and I have this.

Shown here clamping onto a bookcase with flannel to get a good grip without scratching the wood.

And if you are wondering why I don’t use those big clamps with the green or orange rubber tips, it’s because I can’t find any place that sells them around here!

Finally, if you want a real Justin Clamp – which is better but more expensive than a DIY version then you can always buy one from B&H. They are $56.95 but like any Bogen stuff will probably last your whole lifetime!

Folding Paper Grid Spot

In my last post I used the folding paper grid spot — you know what a grid spot is right

?   Now there are plenty of ways of making your own — if you don’t want to buy a professionally made one

— the most effective seem to be using black drinking straws, and I have made a couple like that and they are great.

But they are a little on the bulky side — I mean I can’t slip one into my pocket — at least not without the girls saying “Is the a grid spot in your pocket or are you just pleased to see me“.   So wanting to be a little more discrete I came up with this idea.

It does work fine — compare the first two images below — the first with the grid spot on, and the second without and the SB-800 just zoomed to max 105mm.  But when folded down it literally fits in my wallet – though in practice I keep it in the little slip case that houses the flash, so whereever I have a flash I have a grid spot as well.

Again, images for us visual folks — and I’ll try to do some writen instructions soon as there is a trick to making that paper matrix easily.  Double sided tape!

[svgallery name=”FoldingPaperGridSpot”]

DIY Bamboo Light Stand

Why a bamboo light stand?  Well if you are a reader of Strobist

then you know that lightstands are very handy — if not read here first.  Of course a factory built one is simple and probably the best option

, but it isn’t exactly cheap.  Particularly if you want more than one — and you will, you’ll want several.  There’s your main light, then fill, then hair and rim lights, and what about some reflectors and…  you get the picture.  Just try not to over-do the whole speedlight thing, heh?

Now one good solution to keep Strobist from hurting your wallet is the Stick in a Can, click that link and watch the video if that name doesn’t mean anything to you, but good/cheap and DIY as that is it isn’t great for portability.  I mean how many cans full of concrete can you carry about – even in the back of your car?

So here is my solution to the problem — which makes sense for me because were I live bamboo is cheap cheap cheap.  This light stand uses three 6 foot pieces of bambo, some brass bolts and a piece of string.  The bolts and string cost me more than the bamboo.

If you live somewhere where bamboo is an exotic import and costs a fortune, well then this post is of only academic interest.  Though flip through the pictures and maybe consider doing the same out of PVC tubing?  I understand that’s pretty cheap — using PVC tubing for photo stands is not new of course.  But that’s another topic. 

As we are visual types I’ll start with a slide show that shows what the stand looks like and how it’s used.  And I’ll follow up with some more details in another post.

[svgallery name=”DIYStrobistBambooLightStand”]

The Self Portrait script

Update: This is now obsolete, use instead the 

DIYPhotobits.com Camera Control 1.0 application.

Also called the “Tethered Remote Bridge” script this addition to my scripting library lets me remotely release the shutter on my D300 or D40, while tethered via USB to my Windows PC.  Then the image is downloaded and displayed in Adobe Bridge within 3-4 seconds.

DOWNLOAD (New version) – Gives you RAW or JPG choice

DOWNLOAD (Old version) – JPG only

It’s a combination of the prior scripts I’ve written so nothing very new to explain.

I am going to be using it while working on my “strobist” portrait skills.  As I don’t have a model I’m stuck with doing self-portraits and I want to sit in my chair and trigger the camera and see the results all without getting up.

Yes I know I still have to work to adjust lights and such but it is still sure to be less back-and-forth between camera and seat now!